Old Man Emu OME Parabolic MT64 Monotube Suspension Lift Kit Ford Ranger T6.2 P703 PX4 2022-on with Airbags

Old Man Emu suspension kits are Australian engineered and have been sold worldwide for more than 30 years. This premium kit offers a great solution for on and off road use, with flexible options for varying amounts of weight.

Model: Ford Ranger T6.2 P703 PX4 2022-on
Years Covered: 2022 – 2023 – 2024 – 2025 – 2026
Estimated Lift (front/rear): 40mm
Notes: No top mounting bushes supplied, re-use OE Top Hat, Dirt Shield and Bump Stop. MT64 dampers do not suit OE coil springs. Fitment of Driveline Spacer Kit FK113 is recommended to re-align driveline. FK114 Headlight Sensor Bracket is only required for vehicles fitted with upgraded auto levelling head lights. FK116 Diff Breather Extension Kit is required for vehicles fitted with AdBlue. Wildtrack model is approximately 200kg heavier and will result in 10-15mm less in ride height; trim packers may be required. Fitting the airbag kit is mandatory, the parabolic springs are not designed to be fitted without airbags. Airbag kit comes with fitting hardware as shown.

This kit carries TUV approval, which covers most configurations and variants. Do ask for details before purchasing if TUV is required in your country or region as it may not cover all options or model years.

Technical Information
Choosing the right suspension: Click Here

Whether you are travelling on-road, using your vehicle for green laning or competition purposes, or towing a caravan or trailer, the importance of a fully integrated 4×4 suspension system is paramount. Often, factory suspension setups cannot cope with extended heavy use and over time your springs can corrode or begin to sag. Shock absorbers can also become degraded or start to leak. Handling and load carrying can then suffer and eventually, if not replaced, components can fail. This could render the vehicle un-roadworthy and may even leave you stranded or cause an accident.

Old Man Emu MT64 suspension upgrades are designed for superior performance across all terrain, providing noticeable improvements to vehicle performance, increased load carrying capacity and control characteristics. These high-grade kits feature large diameter monotube shocks and every single component is developed and tested in-house by dedicated suspension engineers. Get your vehicle ready for adventure with the most important upgrade of all – a premium suspension kit.

Driver and passenger comfort were top of the list when the engineers at OME developed this kit. Adding parabolic springs and airbags to your vehicle will take your suspension performance and comfort to the next level. OME parabolic springs feature specially designed tapered leaves and are much lighter in weight than traditional multi-leaf packs. This gives next level ride comfort on and off road whilst still maintaining great off road ability. Adding air bags to the kit is mandatory and the OME airbags are unique in that they feature an internal bump stop, allowing them to be run at 0 PSI when the vehicle has no load.

The OME airbags come with brackets and fitting hardware, air lines and schrader valves for inflation. This is the same fitting as is used on car tyres and means that the airbags can be inflated with a foot pump or at a petrol station. Alternatively, if the vehicle has an ARB on-board air compressor (any ARB on-board model is suitable, see our other products) it is possible to add the optional Bluetooth Control Module kit. This is controlled by a smartphone app which runs on most Apple and Android devices, and allows for precise inflation and deflation control via the app. If you have the ARB Linx system in your vehicle, it is also possible to use this to control the system, additional hardware is required.

MT64 Monotube High Performance Kit

Old Man Emu have developed a high performance suspension solution for this vehicle model: MT64 Monotube. This upgrade is the outcome of a long development process aimed at delivering a high performance monotube damper for overland use and heavily laden vehicles. Unlike most standard shock absorbers, MT64 features a single heavy-duty tube design with a large 64mm diameter. The increased capacity allows the shock absorber to run cooler for longer, even in the most punishing conditions.

The MT64 front struts have a unique adjustable design, which allows for simple height adjustment of +/- 15mm in 5mm increments, so you can adjust your front-end ride height to suit the weight of accessories such as bumpers and winches – now or in the future. This premium upgrade is designed for the driver who demands a high performance and high durability suspension package, regardless of terrain.

Selecting the right kit for your vehicle weight and usage is very important. Most standard vehicles, without extra permanent weight, will benefit most from a medium-rate setup. Some kits are given a weight rating in kg, this applies to permanent front or rear accessory weight such as steel bumpers, winches, etc. Other kits are rated for "bull bar", "bar and winch" and so on; this refers to full-weight protection bumpers and bull bars.

4×4 Works are authorised and trained by Old Man Emu. We have skilled and award-winning suspension engineers available to answer any questions and help you choose the right setup.