Old Man Emu OME Nitro Plus Parabolic Suspension Lift Kit Volkswagen Amarok Series 2 VW 2022-on with Airbags

Old Man Emu suspension kits are Australian engineered and have been sold worldwide for more than 30 years. This premium kit offers a great solution for on and off road use, with flexible options for varying amounts of weight.

Model: Volkswagen Amarok Series 2 VW 2022-on
Years Covered: 2022 – 2023 – 2024 – 2025 – 2026
Estimated Lift (front/rear): 40mm
Notes: Fitment of Driveline Spacer Kit is recommended to re-align the driveline. Headlight Sensor Bracket is only required for vehicles fitted with upgraded auto-levelling headlights. Bump Stop Adapter Kit is optional but is highly recommended to save fitment time. Diff Breather Extension kit is required for models with AdBlue only. Front spring load ratings are based on an ARB Summit Bull Bar. If fitting a lighter bumper, including an ARB Sahara Bar, you should select one rating lower for correct ride height. OME parabolic springs are only designed to be fitted with an OME airbag kit, they cannot be fitted without airbags.

This kit carries TUV approval, which covers most configurations and variants. Do ask for details before purchasing if TUV is required in your country or region as it may not cover all options or model years.

Technical Information
Choosing the right suspension: Click Here

Whether you are travelling on-road, using your vehicle for green laning or competition purposes, or towing a caravan or trailer, the importance of a fully integrated 4×4 suspension system is paramount. Often, factory suspension setups cannot cope with extended heavy use and over time your springs can corrode or begin to sag. Shock absorbers can also become degraded or start to leak. Handling and load carrying can then suffer and eventually, if not replaced, components can fail. This could render the vehicle un-roadworthy and may even leave you stranded or cause an accident.

Old Man Emu suspension upgrades are designed for superior performance across all terrain, providing noticeable improvements to vehicle performance, increased load carrying capacity and control characteristics. These are high-grade kits with worldwide warranty support and every single component is developed and tested in-house by dedicated suspension engineers.

Driver and passenger comfort were top of the list when the engineers at OME developed this kit. Adding parabolic springs and airbags to your vehicle will take your suspension performance and comfort to the next level. OME parabolic springs feature specially designed tapered leaves and are much lighter in weight than traditional multi-leaf packs. This gives next level ride comfort on and off road whilst still maintaining great off road ability. Adding air bags to the kit is mandatory and the OME airbags are unique in that they feature an internal bump stop, allowing them to be run at 0 PSI when the vehicle has no load.

The OME airbags come with brackets and fitting hardware, air lines and schrader valves for inflation. This is the same fitting as is used on car tyres and means that the airbags can be inflated with a foot pump or at a petrol station. Alternatively, if the vehicle has an ARB on-board air compressor (any ARB on-board model is suitable, see our other products) it is possible to add the optional Bluetooth Control Module kit. This is controlled by a smartphone app which runs on most Apple and Android devices, and allows for precise inflation and deflation control via the app. If you have the ARB Linx system in your vehicle, it is also possible to use this to control the system, additional hardware is required.

Nitro Plus kits have another innovative and clever feature – the ability to height adjust the front struts to cater for additional weight within a range of 25mm or 1 inch. This is designed to allow for correct ride height to be achieved when adding accessory weight such as bumpers and winches, and is also ideal for users who might plan on adding weight in the future. Adjustment is simple and instructions are included.

Selecting the right kit for your vehicle weight and usage is very important. Most standard vehicles, without extra permanent weight, will benefit most from a medium-rate setup. Some kits are given a weight rating in kg, this applies to permanent front or rear accessory weight such as steel bumpers, winches, etc. Other kits are rated for "bull bar", "bar and winch" and so on; this refers to full-weight protection bumpers and bull bars.

4×4 Works are authorised and trained by Old Man Emu. We have skilled and award-winning suspension engineers available to answer any questions and help you choose the right setup.