ARB Air Locker locking differentials allow you to tackle the toughest terrain. The world’s premier traction aid, ARB air lockers help keep you moving in all conditions.
Part Number: RD224
Description: Nissan M205
Application: Various – see application guide
Shaft Splines: 30
A relentless commitment to research and design, the use of quality materials, and an uncompromising approach to manufacturing have all contributed to the Air Locker’s success in over 100 countries worldwide. Designed and manufactured in Australia, ARB Air Lockers locking differentials will enhance the traction of your 4×4 in just about any terrain, whether it’s rock, clay, gravel, sand, snow or mud.
Now with a state-of-the-art two piece design available right across the range, forged gears for the ultimate in strength and durability, and an industry-leading five year warranty, ARB Air Lockers are better built and better backed than ever before. Many people believe that a 4WD and traction go hand in hand… you can’t have one without the other. However, your vehicle’s standard (or open) differential is designed to allow each wheel to turn independently, thus eliminating binding during turns. Off road, this becomes a major burden as engine power will take the path of least resistance, which occurs at the wheels with little or no traction.
Newer vehicles with limited slip differentials may offer some improvement, but more often you’ll find the slipping is not ‘limited’ enough to maintain forward progress. Automatic locking differentials also have their disadvantages. Aside from being noisy when disengaging, they can also upset the on-highway driving characteristics of your vehicle.
- Forged gears for maximum durability
- Two piece design – less moving parts
- Comprehensive 5 year, unlimited mileage warranty
- Supplied with installation hardware and fitting instructions
- Compatible with ARB Air Compressors
“Does the kit contain all required parts?”
If you are purchasing an ARB Air Locker plus an ARB air compressor (any size), you will have all parts needed for a standard installation, with the exception of carrier bearings.
“Do I need replacement carrier bearings?”
Some Air Lockers require different size carrier bearings, although this is rare.
“Is drilling required?”
Drilling is required to run the air line through the housing.
“Are special tools or skills needed?”
Full instructions are supplied and most steps can be performed by any competent mechanic with standard tools. You will need to perform setup as you would with a standard differential.
“Can I use my existing ring and pinion?”
Yes, these parts are normally retained and re-fitted.
Ask us a question
All information and photos are for general guidance only and the parts you receive may vary depending on your specific application. Whilst we go to every effort to show the correct part in the photos, this is not always possible.